UTUBE NUMBER: 2192
MANUFACTURER: STRECKS, INC.
MODEL NUMBER:
SERIAL NUMBER:

SPECIFICATIONS:
Hand of Operation: Right to Left
Maximum Tube Diameter: 1" (25.4 mm)
Minimum Tube Diameter: 1/4" (6.3 mm)
Maximum Wall Thickness: .049" (1.2 mm)
Minimum Wall Thickness: .018" (.45 mm)
Maximum Line Speed: TBD = Max. Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI

GEAR BOX DATA:
Spindle Diameter: 1-1/2" (38 mm)
Roll Space Forming: 3-1/2" ( mm)
Roll Space Fin: 3-1/2" ( mm)      
Roll Space Sizing: 3-1/2" (152.4 mm)
Forming Horizontal Centers: 12-1/2"
Fin Horizontal Centers: 25"
Sizing Horizontal Centers: 18"

ENTRY:
LEE SHAFER Shear & End Welder
Maximum Strip Width: 7"
Two (2) Driven Strip Edge Brushes

FORMING MILL:
Entry Guide
2 - Driven Breakdown Stands
2 - Idle Breakdowns
3 - Idle Side Rolls
2 - Driven Fin Stands

WELDING SECTION:
1 - Seam Guide
1 - 2 Roll Weld Pressure Unit
1 - TIG Torch Assembly

SIZING MILL:
3 - Driven Sizing Stands
4 - Idle Side Rolls
1 - Idle Measuring Wheel Stand
1 - Spray Paint Marker

EDDY CURRENT TESTER:
1 - MAGNAFLUX CORP. F2-450 w/Driven 8 Roll Pull-Out

STRAIGHTENER:
1 - 2-Plane, 7 Horizontal & 7 Vertical Idle Straightening Rolls

CUT-OFF:
1 - MATTHEWS Ink Marker Roll
1 - DURANT Length Control
1 - BERTOLETTE Rotary Disc Traveling Cut-Off w/Pull-Apart

MILL DRIVE:
No Drive is Included with this quotation.

Note: No D.C. Drive is included with this quotation.

Tooling: 19/32" (15mm) Tooling on Mill