UTUBE NUMBER: 1728
MANUFACTURER: MCKAY
MODEL NUMBER: S.O. #4414

SPECIFICATIONS:
Max. Tube Diameter: 1-1/2" (38 mm)
Min. Tube Diameter: 1/2" (12.5 mm)
Max. Wall Thickness: .050" (1.27 mm)
Min. Wall Thickness: .020"
Max. D/T Ratio: 60:1
Min. D/T Ratio: 10:1      
Max. Material Yield: 50,000 PSI
Max. Mill Speed: 150 FPM (46 MPM) Max. Gear In Speed, No Load
Rollspace: Forming: 10-1/2"
Sizing: 10"
Vertical Adjustment: 4" - 7"
Center Lower Spindle to Base: 6"
Driven Spindle Diameter: 1-3/4"
Hand of Operation: Right to Left

ENTRY EQUIPMENT:
1- Double LITTELL 4,000 Lb. Uncoiler

FORMING MILL - 20 HP D.C. Motor, 1750 RPM:
1- Pinch Roll
1- Entry Guide Unit w/Edge Trimming
3- Driven Breakdown Stands
3- Driven Fin Stands
6- Idle Side Roll Units

WELDING SECTION:
1- MCKAY ERW Welder 75 KVA
1- Seam Guide Unit
1- Weld Pressure Unit, 2-Roll

COOLANT SECTION:
1- 5' Coolant Zone

SIZING MILL, 20 HP D.C., 1750 RPM:
3- Driven Sizing Stands, 2" Shaft Diameter
3- Idle Side Roll Units
1- Straightener

ELECTRICAL:
SHERER Electrics Control Panel


TOOLING to produce the following sizes:
1.050 Round On Mill

CONDITION: GOOD, Electrics Should be Replaced