MATERIAL: ALUMINUM, BRASS, COPPER, STEEL.

MAXIMUM THICKNESS: .125"
MINIMUM THICKNESS: .006"
MAXIMUM UNTRIMMED WIDTH: 13.75"
COIL WEIGHT - MAXIMUM: 2500#
COIL I.D. AT PAYOFF: 14.5" - 20.5"
COIL WEIGHT PER REWIND ARBOR: 1000# MAX.
MAXIMUM REWIND DIAMETER: 36"

CONSISTING OF THE FOLLOWING:

-PAYOFF - AMERICAN STEEL LINE
MODEL 60
S/N: 8654 4/90
CAPACITY: 2,500# X 20" WIDE
EXPANSION RANGE: 14" - 21"
MANUAL EXPANSION
COIL OD: 54" MAX.
3 SEGMENT MANDREL
3 COIL KEEPERS
EATON AIRFLEX BRAKE
NON-MOTORIZED
35" PASSLINE HEIGHT

-SLITTER HEAD: MODEL 149-83A
N1989 3X
S/N - 5322
NO. CUTS: 6 TO 8 IN .062" BRASS
4 IN .093" BRASS
2 IN .125" SOFT BRASS.
CUTTER DIAMETER: 6"
SPACER DIAMETER: 4"
SLITTING ARBOR: 2.875" DIA. X 13.5" FACE WIDTH
MAX. ENTERING STOCK: 13.75" WIDE
OPERATING SPEED: 0-300 FPM
MOTOR: 15 HP AJUSTO WITH DYNATORQ BRAKE
JOG ACCELERATIONS STARTER AND PUSH
BUTTON CONTROLS. (COMMON DRIVE FOR
SLITTER HEAD AND TAKEUPS)
ELECTRICS: 208/3/60

-LESS SLITTER TOOLING
-SLITTER WITH LINK GEARS AND ANTI-FRICTION BEARINGS
(SAME AS N1780)
-ENTRY TABLE WITH ROLLER SIDE GUIDES
MANUALLY ADJUSTABLE
(N1967 TABLE WITH SHOP MODIFICATIONS)
-SINGLE TOP AND DOUBLE BOTTOM PRESSURE BARS
FINGER SUPPORTS
-ENTRY PASSLINE ROLL
-STEEL STRIPPER RING ASSEMBLY. TOP AND BOTTOM
6.5" DIA. STEEL RINGS
-IDLE EXIT PINCH ROLLS
2" DIA. X 14.5" FACE WIDTH
(SHAFT EXTENDED FOR FUTURE DRIVE TO BOTTOM ROLL ONLY)

-DOUBLE ARBOR ELECTRIC CLUTCH TAKEUP (LIKE N1804)
DYNAMATIC CLUTCH ON EACH TAKEUP ARBOR WITH TOOTH TYPE
DRIVE BELTS.

-TAKEUP ARBORS: 2 - 2.5" DIA. ARBORS (SIMILAR TO N1804)

-TAKEUP DRUMS:

ONE (1) - 6" DIA. X 20" FACE, SOLID DRUM W/MATERIAL SLOT
AND 14" DIA. BACKPLATE. 3" BORE

ONE (1) - 6" DIA. X 22.5" FACE, SOLID DRUM W/MATERIAL SLOT
AND 14" DIA. BACKPLATE. 2.5" BORE

ONE (1) - 8" DIA. X 15" FACE, MANUAL EXPANSION W/MATERIAL SLOT
AND 16" DIA. BACKPLATE. 3" BORE

ONE (1) - 8" DIA. X 20" FACE, MANUAL EXPANSION W/MATERIAL SLOT
AND 16" DIA. BACKPLATE. 3" BORE

ONE (1) - 12" DIA. X 20" FACE, MANUAL EXPANSION
W/MATERIAL SLOT. 3" BORE

ONE (1) - 16" DIAMETER X 15" FACE, MANUAL EXPANSION
W/MATERIAL SLOT AND 24" DIA. BACKPLATE. 2.5" BORE

-SCRAP WINDER
NON-DRIVEN (CAN BE DRIVEN)

-APPROX. SIZE OF SLITTER ONLY: 131" L X 65" W X 58" HIGH

-GOOD CONDITION

-IN STORAGE