WELDING MANIPULATORS, POSITIONERS & TURNING ROLLSWELDING POSITIONERS
200 lb. All-Fab #PS-1F-5, vari-speed, 90°tilt, 12" machined table, 500 amp ground
Standard Features: Model PS-1F-5 Shown with optional MT6 chuck
The model PS-1F-5 is the finest small bench top positioner in
the world and has the following standard features:
Solid State D.C. infinitely variable speed table rotation.
Heavy duty fully enclosed worm gear rotation drive. All gears and bearings are fully sealed and lubricated for long life and safety.
On/off electric foot control.
500 amp welding ground at 50% duty cycle.
120 volt AC 50/60 Hz input power.
Machined table with centering grooves and 6 tee slots for
ANSI Tee nuts.
High frequency protected for Tig welding.
Dynamic braking and power on indicating light.
Durable baked on enamel paint finish.
Infinitely variable table tilting with degree scale.
Clockwise and counter clockwise table rotation.
Highest quality design and construction available.
Specifications Model PS-1F-5
Maximum capacity table in the flat position 200 lbs
Maximum capacity table at 90 degrees 100 lbs
Rotation centroid max capacity model PS-1F-5 1 inch
Rotation centroid max capacity model PS-1F-15 0.39 inches
Tilting overhang at max capacity 2 inches
Table tilt degrees 0 to 90
Rotation speed model PS-1F-5 .3 to 5.0 rpm
Rotation speed model PS-1F-15 1 to 15 rpm
Table diameter 12 inches
Tee slots 6 at 60 degrees
Table height in the flat position 14.88 inches
Weight approximate 78 lbs