UTUBE NUMBER: 352
MANUFACTURER: LIVERNOIS
AGE: 1985
SPECIFICATIONS:

Maximum Tube Diameter: 1" (25.4 MM)
Minimum Tube Diameter: 1/2" (12.7 MM)
Maximum Wall Thickness: .043" (1.09 MM)
Minimum Wall Thickness: .009" (.23 MM)
Maximum Mill Speed: 442 FPM (135 MPM), Max. Gear In Speed, No Load
Roll Space Forming: 3" (76.2 MM)
Roll Space Fin & Sizing: 3" (76.2 MM)
Driven Spindle Diameter: 1-1/2" (38.1 MM)
Hand of Operation: Left to Right

ENTRY EQUIPMENT:
2 - Single Uncoilers 1,500 Lb. Uncoiler, Pneumatic Brake
1 - Shear End Welder, Guild DMA 100-3, Manual Clamp, Hyd.

FORMING MILL:
1 - Entry Guide Unit
4 - Driven Breakdown Stands
1 - Driven Fin Stand
1 - Operator Control Station

WELDING STATION:
1 - Seam Guide Lead Roll
2 - Weld Pressure Units
2 - Single Scarfing Stands
1 - Bead Winder
1 - No Welder included
1 - Weld Checker

SIZING MILL:      
1 - Caterpillar Type Pull Out Station
1 - Driven Pre-Oval Pass
3 - Pass Ovaling Section - Powered
3 - Pass Sizing Section - Powered
3 - Pass Edge Sizing Section - Powered

CUT-OFF:
1 - Livernois Flying Cut-Off System

MILL DRIVE:
50 HP DC Reliance Solid State AC to DC Converter

DRAWINGS:
1 - Complete Set of Electrical and Mechanical Drawings. All Necessary Installation Drawings.
1 - All Necessary Catalogs For All Equipment Purchased With This Line.

TOOLING: Round .431" and oval tube

SPEED: 400 FPM

CONDITION: Very Good

NOTE: This Machine Manufactured a Radiator Tube With The Outside
Dimensions of .110" x .635" With a Wall Thickness of .016" at 400 FPM.