Advanced Search
Surplus Record logo


10" x 27" Jones & Shipman, ID/OD universal cylindrical grinder, nice, 1979

Request a Quote
Click for video

General Specifications

Swing: 10.0"
Centers: 27.0"
Manufacturer: Jones & Shipman
Stock #: 002176
Price: Request a Price

Dealer Information
American Machinery Liquidators logo
American Machinery Liquidators
PO Box 6995
East Brunswick, NJ 08816-6995

Contact: Marc Gallanter
Tel: 732-390-0006
Fax: 732-390-0559
Gold Level Dealer Since 2008

View our Equipment Listings

Detailed Product Description

Maximum diameter ground with new wheel...10"
Maximum grinding length between centers...27"
Maximum workpiece weight between centers...220 lbs.
Table traverse fine feed graduations...0.0002"
Table traverse per revolution of handwheel....5"
Table traverse steplessly variable per minute...3" - 144"
Table swivel adjustment-included angle clockwise...16 Degrees
-included angle counterclockwise...18 Degrees
Cross traverse of wheelhead...8 1/16"
Cross feed handwheel graduated in increments of....0002"
Feed inching lever graduated in increments of...0001"
Automatic infeed of wheelhead at each reversal of
table....0001" - .0006"
Infeed rate at table reversal, reduction in work
Maximum range of continuous infeed for plunge...0.040"
grinding allows a reduction in work diameter
(6) Workhead speeds...40-320 R.P.M.
Workhead swivel, clockwise/counter-clockwise...15 degrees clockwise,
90 degrees anti-clockwise

Tailstock spindle center taper...Jones & Shipman taper
Tailstock spindle center taper...#3 Morse Taper
Standard grinding wheel (EIU Type)...12" diameter x 1-1/2" wide x 5"

(2) Wheelhead speeds...2,000 & 2,650 R.P.M.
Wheelhead swivel adjustment each side of normal
position...180 Degrees
Internal grinding spindle speed...16,500
Internal grinding capacity...3/4"-2" Diameter
Equipped With:
Manually operated or hydraulically actuated table traverse
Manually operated, Automatic Intermittent (at table reversal), and Automatic
Continuous (Plunge grinding) modes of wheelhead infeed
EIU type wheelhead with 180° swivel, left hand external grinding operation, and
swing-around internal grinding attachment with spindle
3/4 H.P. 3/60/220-440 volt motorized workhead mounted on a graduated swiveling base
arranged for live and dead spindle operation
9" Diameter KANETSU permanent magnetic chuck for workhead
Tailstock with plain center
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
BIJUR manually operated one-shot lubrication system
5.5 H.P. 3/60/220-440 volt 1,720 R.P.M. wheelhead motor and electrical controls
Machine is wired for 220 volt operation.
Approximate Weight: 4,256 Lbs.
Approximate Dimensions (Machine Only): 97" L-R x 32" FB x 69" H
Location: F.O.B. NY