Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: April 23, 2026 at 4:31 PM
Industry: General Machinery & Equipment
Description: Hexagon Global S Green 12.22.10 CMM Coordinate Measuring Machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 4:15 PM
Industry: General Machinery & Equipment
Description: Tennsmith, Roper Whitney, Scheckel, etc. 12' by 14 gauge shear with sheet support. Rear return preferred but will look front return as well.
Customer ready to buy.
Customer ready to buy.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 3:52 PM
Industry: Other Electrical & Power Equipment
Budget: $5,001 - $10,000
25kV
TCC 153-2
Just the body/refill, no end fittings needed
TCC 153-2
Just the body/refill, no end fittings needed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 3:16 PM
Industry: General Machinery & Equipment
Price: 79500
Description: MODEL ........................ 400T
CAPACITY ..................... 400 TON … [Read more...]
CAPACITY ..................... 400 TON … [Read more...]
STROKE OF RAM ................ 15"
RAM BORE DIAMETER ............ 16"
DAYLIGHT RAM TO BED .......... 26" MAX
LENGTH OF TABLE .............. 360" (30 FT)
WIDTH OF TABLE ............... 29-1/2"
DISTANCE BETWEEN POSTS ....... 31"
TABLE HEIGHT FROM FLOOR ...... 36-1/2"
PRESS HEAD TRAVERSE .......... 26' - POWERED
PRESS HEAD TRAVERSE .......... CHAIN DRIVEN
PRESS HEAD DESIGN ............ 4-POST, TIE-ROD
RAM BORE DIAMETER ............ 16"
DAYLIGHT RAM TO BED .......... 26" MAX
LENGTH OF TABLE .............. 360" (30 FT)
WIDTH OF TABLE ............... 29-1/2"
DISTANCE BETWEEN POSTS ....... 31"
TABLE HEIGHT FROM FLOOR ...... 36-1/2"
PRESS HEAD TRAVERSE .......... 26' - POWERED
PRESS HEAD TRAVERSE .......... CHAIN DRIVEN
PRESS HEAD DESIGN ............ 4-POST, TIE-ROD
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 3:07 PM
Industry: Circuit Breakers
Description: New surplus in box--Eaton Digitrip 520 MC & New surplus in box Square D LAL36300--Take them both for $4000--Pictures available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:21 PM
Industry: Circuit Breakers
Description: Looking for a spare air breaker Siemens 800 amp 600 V model RLF 800 With the current limiting fusing on it, static trip III relay having LISG functions, manually operated and draw out type
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:17 PM
Industry: General Machinery & Equipment
Description: also looking for 6/16, 6/32 or other CNC Multi-Spindles
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:17 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:16 PM
Industry: General Machinery & Equipment
Description: Other similar models also interesting
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:15 PM
Industry: General Machinery & Equipment
Capacity: 45mm
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:10 PM
Industry: General Machinery & Equipment
Control: Siemens 840C
Capacity 65mm
Ran oil
Still in production, running nylon
With 12-ft Bar Feed (pictured)
Chip Conveyor
Comes the a good amount of tooling
Control Type: Siemens SINUMERIK 840C
Spindle Speed (max.): 6,000 RPM
Power Requirements (V/Hz/PH): 400/60/3
Main Spindle
Speed (max.): 6,000 RPM
Bar Capacity: 65 mm
Power: 20 kW (@ 100%)
Power: 27 kW (@ 40%)
Synchronous Spindle
Speed (max.): 4,500 RPM
Power (max.): 4.2 kW
Capacity 65mm
Ran oil
Still in production, running nylon
With 12-ft Bar Feed (pictured)
Chip Conveyor
Comes the a good amount of tooling
Control Type: Siemens SINUMERIK 840C
Spindle Speed (max.): 6,000 RPM
Power Requirements (V/Hz/PH): 400/60/3
Main Spindle
Speed (max.): 6,000 RPM
Bar Capacity: 65 mm
Power: 20 kW (@ 100%)
Power: 27 kW (@ 40%)
Synchronous Spindle
Speed (max.): 4,500 RPM
Power (max.): 4.2 kW
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 2:02 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 1:29 PM
Industry: General Machinery & Equipment
Description: Looking for a Multi-Axis CNC Turning Center, 2" Bar cap., 2 Turrets, 2 Spindles, Live Tool, Y-Axis
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 12:27 PM
Industry: Motors - A.C. & D.C.
230/460V secondaryV145
9.6/4.8AMP
254 Frame
9.6/4.8AMP
254 Frame
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 12:13 PM
Industry: Circuit Breakers
Description: (148) New surplus in box--Allen Bradley--140MT-D9C-C16--Best offer for any quantity or all 148 breakers--Pictures available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:50 AM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: Hydraulic CNC press brake, 10' - 12' x 150 - 200 ton capacity, Y1 Y2 & X axis,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:45 AM
Industry: General Machinery & Equipment
Budget: Over $100,000
Description: Fiber laser 6 kw - 12 kw with dual pallet/shuttle table, 6x12 cutting area
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:42 AM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: looking for 10' x 16 ga capacity CNC folder and shear with rear sheet supports. Prefer Schechtl, but will look as any manufacturer. Also, looking for a roof panel roll former.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:37 AM
Industry: Other Electrical & Power Equipment
Description: NEUTRAL GROUNDING RESISTOR 200 AMP 36.0 OHMS 12470 N3R
EXISTING UNIT POST GLOVER MU-NG072A200-GGGOAO1GA 12470 L-L 7200 L-N 1 PH … [Read more...]
EXISTING UNIT POST GLOVER MU-NG072A200-GGGOAO1GA 12470 L-L 7200 L-N 1 PH … [Read more...]
NEED A REPLACEMENT NOW
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:17 AM
Industry: General Machinery & Equipment
Max Cutting Length 19.69"
17.72" x 7.87" x 21.65" X-Y-Z Travel
C-axis: 0.001 deg
Main Spindle Chuck: 10"
Main Spindle Bore Dia.: 3"
Main Spindle Max Bar: 2.5"
Main Spindle: 5,000 RPM
36 ATC
B Axis Rotary Tool Spindle: 12,000 RPM
B-Axis: 1 degree
Hydraulic Chucks
Milling Spindle Synchronous Tapping
Tool Eye Automatic Front Spindle
Coolant Thru Milling Head
Multi Tap Transformer
Touch Probe
Spindle Chiller
Parts Catcher
Chip Conveyor
17.72" x 7.87" x 21.65" X-Y-Z Travel
C-axis: 0.001 deg
Main Spindle Chuck: 10"
Main Spindle Bore Dia.: 3"
Main Spindle Max Bar: 2.5"
Main Spindle: 5,000 RPM
36 ATC
B Axis Rotary Tool Spindle: 12,000 RPM
B-Axis: 1 degree
Hydraulic Chucks
Milling Spindle Synchronous Tapping
Tool Eye Automatic Front Spindle
Coolant Thru Milling Head
Multi Tap Transformer
Touch Probe
Spindle Chiller
Parts Catcher
Chip Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:09 AM
Industry: Generators & Engines
Description: I am looking for a used Caterpillar SR4B Generator End, Frame 825, arrangement # 262-8106. Accept core (non operative).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:07 AM
Industry: General Machinery & Equipment
AXIS DRIVE MOTORS: AC-SYNCHRONOUS
PER FULL STROKEFEEDRATES: 2362 IPM
SPINDLE TAPER: HSK-E50
SPINDLE SPEED: 36000RPM
DIAMETER TOOL CHANGER: 30 ATC
Equipped With
36,000 RPM Spindle
Probing
Tooling included
MACHINE WEIGHT: 18,800 LBS
MACHINE DIMENSIONS: 118"W X 118"D X 126"
MAXIMUM WORKPIECE WEIGHT: 1760 LBS
PER FULL STROKEFEEDRATES: 2362 IPM
SPINDLE TAPER: HSK-E50
SPINDLE SPEED: 36000RPM
DIAMETER TOOL CHANGER: 30 ATC
Equipped With
36,000 RPM Spindle
Probing
Tooling included
MACHINE WEIGHT: 18,800 LBS
MACHINE DIMENSIONS: 118"W X 118"D X 126"
MAXIMUM WORKPIECE WEIGHT: 1760 LBS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:05 AM
Industry: General Machinery & Equipment
Table Capacity: 5,533lbs
Laser Head: Bodor Genius Auto Focus
Control: Bodor Thinker 3.0
Max. Linkage Speed: 7.8" / min
Max Acceleration: 4G
Z Travel: 14.5in
Dimensions: 38' x 11' x 8.9'
Equipped With
BodorMAX12kW Resonator
Chiller
Dust Collector
3-Year Warranty from Bodor
Dual Shuttle Table
**Brand New Never Installed**
**Installation Not Included**
Laser Head: Bodor Genius Auto Focus
Control: Bodor Thinker 3.0
Max. Linkage Speed: 7.8" / min
Max Acceleration: 4G
Z Travel: 14.5in
Dimensions: 38' x 11' x 8.9'
Equipped With
BodorMAX12kW Resonator
Chiller
Dust Collector
3-Year Warranty from Bodor
Dual Shuttle Table
**Brand New Never Installed**
**Installation Not Included**
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 11:01 AM
Industry: General Machinery & Equipment
Description: DMTG Model CKE6180Z 31" x 79" (800 x 2000) Flat Bed CNC Lathe, Fagor 8055TC CNC Control, 40 – 1,000 RPM, 15 Hp, 16" 3-Jaw Chuck, 20" Face Plate, Shars Tool Post, 6-Position Vertical Turret, Tail Stock, Steady Rest, Coolant System, Manual, 3.9" H.I.S. Extended X-axis, New 2011.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:56 AM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: (4) Citizen 12mm Channel Sets for Citizen Model CAV12-LE-IS 12' Bar Feeds. Never Used, Still in Boxes.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:51 AM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: Haas Model HA5C Indexers. (3) With 17-Pin Connector Cable and (1) with a 10-Pin and a 7-Pin Connector Cables, Lever Collet Closers.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:48 AM
Industry: Processing Equipment
Price: 2500
Description: Busch vacuum pump, cat. # RCU250C446.1001, includes Toshiba motor
For additional photos, please reach out to us at the contact info provided.
For additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:45 AM
Industry: Processing Equipment
Price: 2500
Description: 2 in stock
Busch vacuum pump, cat. # RA0305D5Z6ZZXX, includes Baldor motor … [Read more...]
Busch vacuum pump, cat. # RA0305D5Z6ZZXX, includes Baldor motor … [Read more...]
For additional photos, please reach out to us at the contact information provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:43 AM
Industry: General Machinery & Equipment
Description: Looking for a good operating 6' O.A. x 40 Ton Hydraulic Press Brake with at least 4" Stroke. CNC Not Needed.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 10:30 AM
Industry: General Machinery & Equipment
Price: Best Offer
Range: 0-1000 L/min
Connection: 1/4BSPT
Pressure Range: 0-1MPa
Options: Compatible with helium/hydrogen, includes display, RS-485 & selectable analog output
Qty: 10
State: Unused, brand-new in box.
Connection: 1/4BSPT
Pressure Range: 0-1MPa
Options: Compatible with helium/hydrogen, includes display, RS-485 & selectable analog output
Qty: 10
State: Unused, brand-new in box.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 9:33 AM
Industry: General Machinery & Equipment
Price: $48,000
Description: 2015 Amada HKB6050CNC Horizontal Cutting bandsaw. Available today.
24 x 20, 2" Blade size, Bundle cutting attachment, fully automatic. … [Read more...]
24 x 20, 2" Blade size, Bundle cutting attachment, fully automatic. … [Read more...]
15 ft roller table included.
Can be seen under power.
FOB location.
Can be seen under power.
FOB location.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 9:30 AM
Industry: Circuit Breakers
Description: ASPP6SF3S GE its a kit to mount a spectra breaker
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 7:18 AM
Industry: General Machinery & Equipment
Description: Speedfam, Kehren, Abplanalp, Wolters or similar single side belt fed thru feed grinder
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 6:53 AM
Industry: General Machinery & Equipment
Description: Speedfam, Kehren, Abplanalp, Wolters or similar single side belt fed thru feed grinder.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 6:18 AM
Industry: General Machinery & Equipment
Price: 10,000
Description: Carbis Adjustable Loading Gangway-Pnuematic Inspection Platform
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 6:16 AM
Industry: General Machinery & Equipment
Price: $175,000
Description: This is a turn key system to process converters and recover valuable fines. Capable of 1000 units per day. FOB Florida.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 6:00 AM
Industry: Other Electrical & Power Equipment
Description: Need QTY2 145kV and QTY2 38kV (3-phase assemblies) for a project energizing this summer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 23, 2026 at 6:00 AM
Industry: Circuit Breakers
Description: Quantity 1 Siemens 15-GMI-500-2000-37 2000 amp charge 120vac/dc close and trip 48vdc C & L 37KA 5 cycle
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:40 PM
Industry: Circuit Breakers
Description: 400 Amp Meter Main / Single phase /240/120/ indoor with UGPS & Dist Prefer new but quote what you have
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 4:26 PM
Industry: Generators & Engines
Description: Have a client looking for multiple G3606, 3608, 3612, 3616 Caterpillar natural gas engines, rebuilt or good core condition.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 4:24 PM
Industry: General Machinery & Equipment
Price: Make offer
Description: New, never used. Has some bent covers and door on electrical box. Skidded and ready to load.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 3:12 PM
Industry: Transformers
Description: (15) EMB dry type transformers--156 KVA--440/460/480 volt primary--400/231 volt secondary--Excellent EOK condition--Take them all--$22,000--Pictures available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 1:21 PM
Industry: General Machinery & Equipment
Description: Hello,
We have a large industrial inventory available for sale located in Reynosa, Mexico, consisting primarily of electric motors, copper wire, and other electrical components and spare parts. The inventory includes over 2,000 SKUs and is currently stored on pallets within an industrial facility. … [Read more...]
We have a large industrial inventory available for sale located in Reynosa, Mexico, consisting primarily of electric motors, copper wire, and other electrical components and spare parts. The inventory includes over 2,000 SKUs and is currently stored on pallets within an industrial facility. … [Read more...]
We are evaluating options for a bulk or partial sale and believe this inventory may be relevant for your marketplace or network of buyers. Plea
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 1:10 PM
Industry: Motors - A.C. & D.C.
Model K33 HLHJ-LNK-NS
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 12:26 PM
Industry: Circuit Breakers
Description: New surplus--Eaton Digitrip 520MC--New surplus--Best offer--Pictures available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 11:29 AM
Industry: Motors - A.C. & D.C.
Price: 6000
Description: This W22 NEMA Premium Efficiency 125 HP 4P 444/5T 3Ph 460 V 60 Hz IC411 - TEFC is a new unit that has never been put into service. Has been professionally tested and is in perfect working condition
Energy Savings: The NEMA Premium efficiency rating typically pays for the motor itself in energy savings over its first few years of operation. … [Read more...]
Energy Savings: The NEMA Premium efficiency rating typically pays for the motor itself in energy savings over its first few years of operation. … [Read more...]
Thermal Management: The aerodynamic fan cover design and FC-200 grade cast iron frame maximize heat dissipation, significantly extending the life of the wi
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 11:23 AM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: 3512MUI Engine Core - 49y or 3YF prefix - with 3161 Governor and HMSO. 1500hp
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:47 AM
Industry: General Machinery & Equipment
.250" mild steel
Hydraulically actuated
Squaring Arm
Back Gauge
Rear Stacker
good to excellent condition
prefers Cincinnati
Hydraulically actuated
Squaring Arm
Back Gauge
Rear Stacker
good to excellent condition
prefers Cincinnati
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:46 AM
Industry: General Machinery & Equipment
Description: 2006 Hardinge GX480. DT APC, 3 position 5-C 4th axis collet closer, BT30 spindle 15000 rpm extra parts for pallet changer(hard to find), 27000 on hrs.17700 working hrs . spindle rebuilt 5000 hrs ago aprox. Z axis screw also replaced minor repairs needed machine stored 2 years
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:22 AM
Industry: Circuit Breakers
Budget: Up to $5,000
Description: Looking for 1 15kva 12,000 volt Control Power Transformer (CPT)
100-1 ratio
100-1 ratio
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:56 AM
Industry: General Machinery & Equipment
Price: 12500
Description: SERIAL ...................... SMX241607
MODEL ....................... SMX-24 … [Read more...]
MODEL ....................... SMX-24 … [Read more...]
WIDTH ....................... 24"
THICKNESS ................... .093"
LENGTH ...................... 999.99"
PASS LINE ................... 49" ADJUSTABLE
CONTROL ..................... SERVOMAX II
PRESS MOUNTED
THICKNESS ................... .093"
LENGTH ...................... 999.99"
PASS LINE ................... 49" ADJUSTABLE
CONTROL ..................... SERVOMAX II
PRESS MOUNTED
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:38 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: Well-maintained AXYZ 5036 Panel Builder CNC router, designed for high-throughput routing of aluminum composite material (ACM), plastics, and similar sheet goods. Machine is equipped with (3) independently controlled 5 HP HSD spindles (ELTE). Working envelope is approximately 72" (Y) x 432" (X) x 6" (Z). Controlled by AXYZ A2MC w/ Ethernet connectivity. Serviced with a full inspection and preventative maintenance completed by AXYZ on 1/21/2026. Machine is currently under power. Serial# 6009-5899
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:31 AM
Industry: Other Electrical & Power Equipment
Description: Hello, My name is Tony and I am looking for a Dead Tank, SF6, 145KV max (138KV nominal), 2000A, 63kA, 3-cycle interrupting time, 125VDC control voltage.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Description: I have inherited a metal lathe from my dad. I’d love to list it to see if someone would want it versus sending it to scrap. I have contacted the Manufacturer, and they do not have this model on file anymore. Does any dealer want it?
I have attached some photos. It is a Southbend precision lathe, model C. 3 1/2 foot bed length.
I have attached some photos. It is a Southbend precision lathe, model C. 3 1/2 foot bed length.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:23 AM
Industry: General Machinery & Equipment
Price: $52,900.00 LESS 10%
Description: 6'6" X 10', 30 HP 60,000 PSI INTENSIFIER, HOPPER, VERY GOOD CONDITION, READY TO SHIP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:21 AM
Industry: General Machinery & Equipment
Description: Acme-Gridley 1 1/4"RA6 screw machine
Index MS52 6 spindle screw machine … [Read more...]
Index MS52 6 spindle screw machine … [Read more...]
Gildemeister GM20AC 6 spindle screw machne
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:19 AM
Industry: General Machinery & Equipment
Description: Extrude Hone Model C-250 Thermal deburring machine mfd. 2018
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:15 AM
Industry: General Machinery & Equipment
Description: 900 - 1000 Ton Plastic Injection Molding Machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:35 AM
Industry: Processing Equipment
Description: Hi There, i am looking for an arctic package TEG system with a 500K BTU/hr burner.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:14 AM
Industry: Other Electrical & Power Equipment
Description: Please quote and availability (6) - 200a 600v type J fuses
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:07 AM
Industry: Processing Equipment
Price: 12000
Description: Zurn Z1188‑ST‑200‑4IP Large Capacity Oil Interceptor – 200 GPM Fabricated steel oil interceptor with integral storage tank. Acid‑resistant coated interior and exterior. Unit rated at 200 GPM with ~333‑gallon water capacity. Never placed into service. Includes covers and original fittings shown. Availability without factory lead times located in Mechanicsburg, PA. Buyer is responsible for freight, loading assistance available.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 5:11 PM
Industry: Motors - A.C. & D.C.
Application for pump
Right now as the nameplate. Open for Standard bearing.
Thanks
Right now as the nameplate. Open for Standard bearing.
Thanks
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 4:46 PM
Industry: General Machinery & Equipment
Description: Okuma GP-26T CNC Cylindrical Grinder (2011)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 4:07 PM
Industry: General Machinery & Equipment
Price: 12500
Description: CAPACITY ...................... 110 TONS
MAX PUNCHING DIAMETER ......... 1-1/4" … [Read more...]
MAX PUNCHING DIAMETER ......... 1-1/4" … [Read more...]
MAX PUNCHING THICKNESS ........ 1"
ANGLE(L1 ...................... 6 x 6 x 5/8"
THROAT DEPTH .................. 16"
STROKE ........................ 2-3/8"
DIMENSIONS .................... 74" x 30" x 89"
ANGLE(L1 ...................... 6 x 6 x 5/8"
THROAT DEPTH .................. 16"
STROKE ........................ 2-3/8"
DIMENSIONS .................... 74" x 30" x 89"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:40 PM
Industry: General Machinery & Equipment
Description: Accurpress 519012 Accell 190-12 CNC Press Brake (2011)
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:25 PM
Industry: Circuit Breakers
Description: Looking for multiple GE AKS-5A-50 breakers. Prefer manually operated breakers but quote any you have that pass NETA spec for insulation resistance. This is a factory replacement breaker for the AK-50 using AKR parts
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:14 PM
Industry: General Machinery & Equipment
Price: $7500.00
Description: The Despatch LAC1-67 is a 6.7 cu ft high-performance, benchtop, mechanical convection lab oven, designed for precise, uniform heating up to 260°C (500°F). It features horizontal airflow, digital controls, and stainless steel interior, ideal for curing, drying, annealing, and testing.
Certified MTP +4 … [Read more...]
Certified MTP +4 … [Read more...]
Key Specifications & Features
Capacity: 6.7 cu ft (189 liters).
Temperature: Maximum 260°C (500°F).
Airflow: Horizontal recirculating airflow for superior uniformity.
Capacity: 6.7 cu ft (189 liters).
Temperature: Maximum 260°C (500°F).
Airflow: Horizontal recirculating airflow for superior uniformity.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:50 PM
Industry: Motors - A.C. & D.C.
Description: I am writing to enquire about this motor if you have some available. Details information: 250HP, 500V DC, 398A, 850/1020RPM, frame: 587ATZ, Duty: cont. Ambient: 40c, Winding: STAB SHUNT.
Please the name plate is attached for further information. … [Read more...]
Please the name plate is attached for further information. … [Read more...]
Thank you
Kind regards
Isaac Ndede
Kind regards
Isaac Ndede
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:45 PM
Industry: General Machinery & Equipment
4 jaw independent chuck
Still in Connecticut shop under power. Still making parts
$8K net
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Still in Connecticut shop under power. Still making parts
$8K net
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:28 PM
Industry: General Machinery & Equipment
4 jaw independent chuck
Still in Connecticut shop under power. Still making parts
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Still in Connecticut shop under power. Still making parts
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:22 PM
Industry: General Machinery & Equipment
Description: 60" - 72" CNC VTL with Living Milling, 2005 and Newer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:01 PM
Industry: General Machinery & Equipment
Description: Also looking for SR20 and other later model Stars
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:00 PM
Industry: General Machinery & Equipment
Description: Also looking for L32 and other Citizens in good condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:00 PM
Industry: General Machinery & Equipment
2 NCU
2 Syncrons
2 Y-Axis
Control: Siemens Solution Line
Knoll System
Bar Feed: IEMCA SIR rack loader (12-ft)
22,000 on-hours
10,000-15,000 Hours
2 Syncrons
2 Y-Axis
Control: Siemens Solution Line
Knoll System
Bar Feed: IEMCA SIR rack loader (12-ft)
22,000 on-hours
10,000-15,000 Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Description: Spinner MICROTURN 52 LTBS
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
AUTOMATION READY - MC0122
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:56 PM
Industry: Circuit Breakers
Description: 15-GMI-500-2000-37 Prefer 120VAC charge and 48VDC close and trip but we can modify if needed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:34 PM
Industry: Generators & Engines
Price: 36,500.00
Description: 2005 Cummins 855 Nat Gas Generator set, Battery charge, Jaket water heater. Weather enclosed, FOB -Gill Colorado
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:01 PM
Industry: Generators & Engines
Price: 20000
Year 2001
288kVA
230kW
0.8 COS
60Hz
3-Phase
12-Wire
For additional photos, please reach out at the contact information provided.
288kVA
230kW
0.8 COS
60Hz
3-Phase
12-Wire
For additional photos, please reach out at the contact information provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 12:27 PM
Industry: Processing Equipment
Description: I am looking for a Sprout/Waldron screener, model 3 1/2 x 7 with a single deck.
If you have anything for sale in this model please contact me with the price and details. … [Read more...]
If you have anything for sale in this model please contact me with the price and details. … [Read more...]
Thank You
Daniel Moore.
Daniel Moore.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:48 AM
Industry: Circuit Breakers
Description: 7850 4160 120 360 AMPS STARTER WANT AIR STARTER OR VACUUM UPGRADE GOULD ABB
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:43 AM
Industry: Circuit Breakers
Description: Toshiba HV6CS-MLD-VS BREAKER 24VDC TRIP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:37 AM
Industry: General Machinery & Equipment
Description: SMTCL TPX6113B/2 5.12" Table Type Horizontal Boring Mill (2011)
Equipped With … [Read more...]
Equipped With … [Read more...]
Facing Head
3 Axis Digital Readout
Built in Rotary Table
3 Axis Digital Readout
Built in Rotary Table
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:30 AM
Industry: Circuit Breakers
Description: Looking for a Siemens type 05-GMSG-GCB-0040-3000-110 breaker; 5KV, 3000A, 120vAC control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:54 AM
Industry: General Machinery & Equipment
Description: Royal Master TG-12x4 or TG-12x3 centerless grinder for rebuild, cheap buyer!!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:49 AM
Industry: Circuit Breakers
Description: Looking for a rectifier assembly for Westinghouse DH gear. PN is 412D894H44, 240VAC to 125VDC and 100A rating, photo available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:30 AM
Industry: General Machinery & Equipment
Description: APPROXIMATE 30" DIAMETER, 3-JAW, WITH L-3 BACK
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:29 AM
Industry: General Machinery & Equipment
Description: MINIMUM 36" DIAMETER CAPACITY FOR PIPE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:16 AM
Industry: General Machinery & Equipment
Description: G&L wet grinder for die repair
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:54 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:49 AM
Industry: General Machinery & Equipment
Description: Wanted: Hydraulic Plate roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: Hitachi Seiki CNC lathe - Worked before being unhooked from power
Model HT20SII - Hitecturn20SII … [Read more...]
Model HT20SII - Hitecturn20SII … [Read more...]
12 Tool, 8” Chuck, 15” Swing, 5000 RPM
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:24 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: OD Cylindrical Grinding Center - worked before being unhooked from power
Manufacturer – Norton … [Read more...]
Manufacturer – Norton … [Read more...]
Model # - CTU 14”
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:11 AM
Industry: General Machinery & Equipment
Description: ALMCO V-14120 Thru-Feed Vibratory Finishing System, 13.8 Cu. Ft. Tub Capacity, 120" L x 14" W x 15-1/2" D Tub, 10-HP Main Motor, (2) Conveyors, New 2022; used approximately 800 hours for a specific job
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:47 AM
Industry: General Machinery & Equipment
Price: 1850$
Description: For sale is a professional-grade Air Cycle Bulb Eater® 3 fluorescent lamp crushing system. This unit was recently acquired as facility surplus and is in full operational condition.
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
New retails for over $5,000. Great opportunity for a warehouse, school or hospital
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:29 AM
Industry: Generators & Engines
Description: We are looking for Gas Turbine parts of GE, Siemens, Alstom, Solar, we are buying/selling the Gas Turbine parts.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:41 PM
Industry: General Machinery & Equipment
Price: $5000
Description: WAZER Pro Water Jet Cutting Machine
Machine has less than 13 total hours of run time … [Read more...]
Machine has less than 13 total hours of run time … [Read more...]
The machine is currently experiencing an issue with locating the home position.Until the home position is correctly found, the machine will not proceed with cutting operations.
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:13 PM
Industry: Other Electrical & Power Equipment
Price: 20000
Description: 3 available come with control box that operates all 3 boilers price for each
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:07 PM
Industry: General Machinery & Equipment
Description: Need 5 oz glass bottles as many as possible
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 3:34 PM
Industry: General Machinery & Equipment
Description: Hydraulic Plate Roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:57 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: 2003 Haas VF-7 CNC Mill with 30 station tool changer, optional hard wire programming, chip auger. Does need the head stock rebuilt.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
